Slot Drain Detail Average ratng: 9,1/10 8198 reviews
Slot

Slot Drains provide a high volume water flow, with a narrow surface opening. This is perfect for not only a sleek look and finish, but also with the ability to move the same amount of water and no larger space or opening on your surface area. Comes in three options, our Micro Slot system, Slot Drain system, and Wall Slot system.

Slot Drain does not absorb water or contaminates and allows any solids to be disposed of in an environmentally friendly manner. The only part of Slot Drain that is exposed is the stainless steel surface which can be cleaned and sanitized in the same manner as your floor surface. Watch how easy it is to clean a Slot Drain System. It is a cost-effective substitute for corrugated steel slotted drains, precast trench drains, or cast-in-place trench drains with steel or cast iron grates. Duraslot drains use HDPE pipe, manufactured by Hancor. An outer corrugated wall provides strength and durability, while the smooth interior lining gives exceptional hydraulics. PHySical DetailS. DURASLOT drains are linear drains designed to capture sheet flow of water from sloping paved surfaces or cleared areas.They have the same inlet as corrugated steel pipe slotted drains. A 1 3/4” wide opening runs the length of the pipe, and special connectors provide for a continuous slot of virtually unlimited length. Find Dura Trench specification sheets and product details for your next slotted pipe project. Manufacturer of Trench drains, Slot drain, Radius trench drains, Stainless steel trench drains, and Utility trenches.

Scope

This specification describes 4- through 36-inch (100 to 900 mm) ADS DURASLOT pipe for use in surface drain applications.

Pipe Requirements

DURASLOT pipe, as manufactured and distributed by ADS, Inc., shall have a smooth interior and annular exterior corrugations with an aluminum slot grate frame mounted longitudinally along the length of the pipe to accept the grate while maintaining the original pipe diameter..

  • 4- through 10-inch (100 to 250mm) pipe shall meet AASHTO M252, Type S.
  • 12- through 36-inch (300 to 900 mm) pipe shall meet AASHTO M294, Type S or ASTM F2306.
  • Manning’s “n” value for use in design shall be 0.012.

The aluminum slot grate frame shall be manufactured from 0.063” tempered commercial aluminum meeting the requirements of ASTM B209, consisting of two parallel plates separated by spacers spanning the slot on 6” centers. The grate shall be ½ - #13 galvanized steel. The grate shall have a diamond-shaped opening and be ADA compliant. The flange at the bottom of the aluminum slot grate frame shall be riveted to the pipe with a minimum of two rivets per linear foot.

Fittings

DURASLOT fittings shall be modified from fittings which conform to AASHTO M252, AASHTO M294, or ASTM F2306.

Slot

Installation

Installation shall be in accordance with ADS recommended installation instructions. Contact your local ADS representative or visit www.ads-pipe.com for a copy of the latest installation guidelines.

Scope

This specification describes 4- through 36-inch (100 to 900 mm) ADS DURASLOT pipe for use in surface drain applications.

Pipe Requirements

DURASLOT pipe, as manufactured and distributed by ADS, Inc., shall have a smooth interior and annular exterior corrugations with an aluminum slot grate frame mounted longitudinally along the length of the pipe to accept the grate while maintaining the original pipe diameter..

  • 4- through 10-inch (100 to 250mm) pipe shall meet AASHTO M252, Type S.
  • 12- through 36-inch (300 to 900 mm) pipe shall meet AASHTO M294, Type S or ASTM F2306.
  • Manning’s “n” value for use in design shall be 0.012.

The aluminum slot grate frame shall be manufactured from 0.063” tempered commercial aluminum meeting the requirements of ASTM B209, consisting of two parallel plates separated by spacers spanning the slot on 6” centers. The grate shall be ½ - #13 galvanized steel. The grate shall have a diamond-shaped opening and be ADA compliant. The flange at the bottom of the aluminum slot grate frame shall be riveted to the pipe with a minimum of two rivets per linear foot.

Fittings

DURASLOT fittings shall be modified from fittings which conform to AASHTO M252, AASHTO M294, or ASTM F2306.

Slot Drain Detail Dwg

Installation

Slot Drain Detail

Installation shall be in accordance with ADS recommended installation instructions. Contact your local ADS representative or visit www.ads-pipe.com for a copy of the latest installation guidelines.